Tutorial: Polymer clay Robot charm

Hi! Follow these steps to make a robot charm using polymer clay :)

Material needed:
- silver polymer clay
- any other color polymer clay
- toothpick
- eyepin
- black acrylic paint

1) Take the silver clay and make two rectangular shapes of different sizes; place the smaller one on top of the big one:

2) Make two small balls using the silver polymer clay and push them against the bottom of the robot; these will be the feet.

3) Take the polymer clay of the other color you chose and roll two short stripes that will go on the sides of the robot. Then add other two small silver polymer clay balls that will be the robot's hands.

4) Take the toothpick and make some holes all around the center part of the robot.

5) Add an eyepin to the top of the charm and bake it for 30 minutes at 100-110°C, then leave it cool down inside the oven and do not touch it until it feels cool and hard.

6) Take a toothpick and dip it in the black acrylic paint and draw the robot's eyes and then in the pink acrylic paint to draw the robot's cheeks. Glaze it for a glossy finish.

This is the final result!

Stay tuned for the upcoming tutorials! ( • ◡ • )